Davco Rapidbond is a single component rapid-setting
flexible tile adhesive for thick and thin bed installation
of tiles for locations where the tiled area needs to be
put into service as quickly as possible.
Davco Rapidbond is classified as C2S1FE when tested
in accordance to BS EN 12004:2007.
• Fixing of ceramic, monocuttura, vitrified, mosaic and
quarry tiles, slate, marble and all types of natural
•Direct fixing over existing floor and wall tiles.
• Used in place of epoxy grouts for bedding and grouting
if a high strength fast setting adhesive is required.
•Bonds well on concrete, cement render, concrete
blocks, rendered brickwork.
• Bonds well on previously hacked surfaces and on
surfaces where a cement based patched mortar has
•Suitable in areas of intermittent of continuous dampness.
•Trafficable after 4.5 hours (depends on the temperature).
•Exceeds the Australian Standard AS 2358-1990 in shear
•No pre-soaking of tiles required.
• Water resistant.
Be the first to review this product
Please note that you can only review after you have purchased and received the product.